![Common installation methods for solid wood flooring]()
Modern people's decoration relies on skilled technicians and high-tech materials to become increasingly convenient, and the results of decoration are also getting better and better. Although all problems can be solved by the decorator, homeowners must not be lazy. When it comes to supervising, it is essential to ensure proper supervision. In this issue of the flooring decoration class, we will introduce three common installation methods for solid wood flooring. How to make solid wood flooring more neat and beautiful is hidden in the following content. Let's take a look together.
Direct installation method for solid wood flooring
Material: moisture-proof fabric+multi-layer solid wood flooring
Ground requirements: height difference of plus or minus 2 millimeters
Applicable to: geothermal and non geothermal
Installation steps:
Firstly, trim the ground and then lay a moisture-proof cloth covering the entire ground to achieve a balanced production effect of moisture and sound insulation. The cushion material used for geothermal energy should not be too thick and can utilize heat conduction.
Female
2. Lay multiple layers of solid wood flooring on moisture-proof cloth.
The installation method of solid wood flooring: rack height installation
Materials: Special keel+thick plywood+moisture-proof cloth+solid wood floor
Ground requirements: The flatness shall not exceed 5 millimeters and the ground above the second floor
Applicable to: non geothermal type
Installation steps:
1. Prepare dedicated wooden keels with a spacing of 350 millimeters or less between them, and the surface of the keels must be kept flat.
2. Apply waterproof adhesive on top of the wooden keel, and then lay a plywood with a thickness of about 12 millimeters on the framework. It is best to saw and cut the plywood into no more than 600 times; The specification is 600mm, with a spacing of 5-10mm between the splints, and then use an air gun to nail the headless nails into the splints and the frame.
3. Lay moisture-proof cloth on top of the plywood, then lay the floor on top of the moisture-proof cloth, and fix the floor with headless nails at a 45 degree angle on the tenon.
Direct laying installation method for solid wood flooring
Female
Material: Thick plywood+moisture-proof cloth+floor
Female
Ground requirements: The flatness shall not exceed 5 millimeters and the ground above the second floor
Applicable to: non geothermal type
Installation steps:
1. Clean up the ground and cut the plywood into no more than 600 pieces with a saw; The specification of 600mm requires a gap of 5-10mm between the clamps.
2. Lay moisture-proof or flame-retardant foam on the plywood, and the moisture-proof cloth on the wall should be 8-10 millimeters larger than the ground. There is no need to stick between the plywood and the moisture-proof cloth.
3. Lay moisture-proof cloth on the plywood, without sticking between the floor and the moisture-proof cloth, and fix the floor with headless nails at a 45 degree angle on the tenon.
Conclusion: Reasonably installed solid wood flooring, warm in winter and cool in summer, has a good touch, a friendly texture, and is natural and soft. With it, home life is more comfortable and comfortable.